Hey, I got a Toshiba 3511 copier with a F-100 code and I was wanting to know if I could just put in a new HDD if I can't format the old one. Will it accept a new formatted HDD without any special procedures?
Thanks for your help
Hey, I got a Toshiba 3511 copier with a F-100 code and I was wanting to know if I could just put in a new HDD if I can't format the old one. Will it accept a new formatted HDD without any special procedures?
Thanks for your help
CompTia A+ Certified
CompTia Net+ Certified
CompTia Server+ Certified
CompTia Project+ Certified
OP Scanshare Certified
if the old one is Maxtor replace it
Western Digital is the most trusted name
You will also have to reload the firmware if you install a new HDD.
08-690-2 set
Replace a New HDD , Update the firmware, DONE!
You should read the service manual about HDD replacement. If you replace your HDD, you should go through your assist modes then format the drive, then reload firmware, then run through certain 08 codes.
The service manual has the procedure written in it for HDD replacement.
Please don't ask me for firmware or service manuals as refusal often offends.
Bookmarks