-
Technician
- Rep Power
- 3
-
Service Manager
250+ Posts
- Rep Power
- 9
Sounds like either a bias problem on the developer unit or just worn out developer. Is the developer going everywhere inside the machine, or do you just feel some developer on the printed page (i.e. sandy feeling.)
-
Trusted Tech
50+ Posts
- Rep Power
- 8
First, what are toner & developer ,OEM or ..? Are you sure they have no problem ?
-
Junior Member
- Rep Power
- 0
check that the transport auger is not clogged or not turning.
-
Trusted Tech
50+ Posts
- Rep Power
- 5
also check:
main charge
drum ground
temp sensor for drum
-
Copier Technician
250+ Posts
- Rep Power
- 6
Quan sát những dây điện áp cho trống. Có thể có một vấn đề đó. Ngoài ra quan sát các trống làm sạch brush có thể bị hỏng.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks