Service Maintenance CODE

[drknow]

Any one know what is the service maintenance code for TOSHIBA e-studio 281C
every time i make a copy the counter register as 2 copy,, and it is a single page and i am not doing double sided either,,
How can i fix that problem??
thanks again

[Baphomet]

08 252 has the current PM counter
START 6 while powering on then select 2 START will get you into PM support mode where you can work with all the individual counters.

I think that is what you were asking for?

[drknow]

hi thanks ,, that was very helphul. NOW my problem is every time i make a copy the counter register as 2 copy,, and it is a single page and i am not doing double sided either,,
How can i fix that problem??
thanks again

[Baphomet]

Do you mean the total counter increments by two, or the PM counter increments by 2? If 08 352 is set to 1 then large size paper will count as two on the total counter, and if it is set to 0 then large size paper will count as one. If you are using the bypass tray and do not explicitly select LT size paper then machine will count it as if it is ledger sized. If you are copying on regular letter size paper and are feeding from one of the drawer and it counts as 2, I don't have an answer for you.

[drknow]

thanks for the reply,, not the pm counter,, the acutal counter increase by 2,
How can i set 08 352 to 0?,
and that should make the count correct.
thanks again

[drknow]

thanks people You are very wonderful.. and thanks for all the help..
problem solved.
thanks again

[ToshibaTech]

Just food for thought; most service providers -want- ledger paper to count as two clicks per side. It just makes sense. If you were making ledger copies and now have changed it so ledger only counts as one click then your service provider (if you are not one or have one) will not be very happy most likely.