Toshiba e-studio 810

Vesigoth · 02-16-2009

Hi guys, I'm getting a CA2 code on this machine(H-sync detection error) any ideas on how to fix this? I tried replacing the laser unit and this did not help. This machine has about 280k on it.

ivovb · 02-16-2009

Original procedure is as next:
[CA2]H-Sync detection error
Are the harness connecting the connector (J210) on the PLG board and connector (J215) on
the SNS board open-circuited? Are the connectors disconnected?
YES
Replace the harness. Connect the disconnected connectors.
NO
1. Replace the PLG board.
2. Replace the laser optical unit.

Laser is the last thing.

BR