Toshiba e207 C97

[Harry]

I have install a 207 3 month ago it curls the paper With C97 There is no lackege on the Main Charger and the Trasfer e seperation Corona can anybody help mi?
Thanks

[ivovb]

Generally it is:

[C97] High-voltage transformer abnormality
(1) Is the main charger installed securely?
(2) Check if the spring of high-voltage supply contact point is deformed.
(3) Check if the needle electrode is broken or the main charger grid is deformed.
(4) Check if any foreign matters is on the needle electrode or the main charger grid.
(5) Is the transfer/separation charger installed securely?
(6) Check if the transfer/separation charger wire is broken or unhooked.
(7) Check if any foreign matter is on the transfer/separation charger wire.

But look more carefully at (7).

BR

[Harry]

Thank you for your post but i have also checked al this points like the handout says there is nothing to see. It is not everitime at the client first after the visit I make more then 50 copys and it works fine there is no smell of ozone and nothing burned in the Transfer sep unit.It is not the main charger because the Drum is not all black.Have annybody another Idea?

Thanks Mille

[jawir]

Hi,

If you have cheked all item that Ivoby suggest, try to check bias voltage.
Also the connector from machine to developer unit. is it in good condition or not? the simple way is try to change process unit including developer unit from ohter machine which is running well.

good luck.


BR

[Harry]

Thank you jawir i was at the copier last Day for the second time checkt all connectors at the powersuppley so now it represens i try your solution.
Thanks again!
Harry

[ivovb]

Please check attached picture. The new electrode type might be the solution. You can remove these two points by yourself.

BR

[Harry]

Thank you sir i check in the partslist right now there is nothing about this mabey her in Italy they are a little in late to update the BSI or tecnical informations. So where the Hell you have it from?

Thanks alot for your answer at the Moment this copier works I try this at the next visit
Maybe you can help me for other to bitches on 205 and on 207 after a long time in standby or at the first time in the morning there is a paperjam. This Maschines work fine for more of a Year. At the 207 have changed everything Pick up roller Pickupclutch allingclutch and Reg sensor
Nothing to do.At toshiba italy, they say to upgrade the last firmware What the hell to do with this paperjam?? Why does this maschines worked for more of a year? There is a Firmware ho talk about this but i think To allong a little the temporation is not a solution serios -so did you have some answer also for this?
Thank you Sir

[ivovb]

So where the Hell you have it from?

Right from the hell as you say.

Concerning paper jams. I have some questions:
1. Firmware version? (Don't be mad)
2. Paper jam code?
3. Total counter?

Did you try in the morning to set a new paper right away from the ream? Did you test paper of better quality?

BR

[Harry]

turned on paperjams
1the firmware of the 205 is 50 on the end this copier is in a network and it works fine till yet.
the paperjam is always e 13
there is a liitle probleme with the umidi in this area i life in sardenia,but this
error occours after a long time when the copier is in standby and also the first time in the morning.
i wish you a nice day

[Harry]

Have change all tensions arround the Drum unit less -10 in 05 Charge Transfer and seperation The copier works fine. Just for Knowlege
A nice Work at all. for paperjams i have modificate the tray to ruduce the space from pick up rollers and the paper no problems anymore and like my job since 1981