281c

[TTL]

Hi,
In one Toshiba E-studio 281c, she was block every time, and I format the disc, but she still the same, then I change the disc and reload the firmware. But she still frozen. And now I can't access to some codes, like 05+396, 05+395, and others that now I don't remenber.
She is very unstable, sometimes don't initialize the network, other's don't make copies (we press the start and nothing occurs). I'm almost crazy with this...

[fireater]

is the memory "original toshiba" or did you pop out to the computer store to get the upgrade? try another hdd... get a new 80 gig western digital give that a try (i had a bad stick of generic ram once..... weird problems)

[Mr Spock]

when replacing the hard drive did you do the following
1. Replace hard drive
2 3 + clear power on option 3 start
3 power off
4 0+8 power on
5 690 start 2 start
6 reload firmware
7 0+8 power on
8 947 start
9 redo 5
10 power off then on

[ivovb]

Also if nothing helps it might come to SYS board replacement.

BR

[TTL]

I think it's ok now.
I change the hdd again, for one WD.
But first I try another hdd from another Toshiba, and it it's always give me one error in the firmware upgrade in the Hdd part. Then I try the memory ram, with no result.. I try some codes too, firmware 2 version's....
And finally the WD Hdd arrived, I try one last time change the HDD and worked..

[ivovb]

Thanks for feed back.