Toshiba E-Studio 352 firmware installations

[metrombs]

Have the above mention copier, had a Maxtor 40GB HDD in the shop and when ahead and installed it. try to do the ON - 3 + Clear procedure, option 3 and give me an error

Need to know if there is a procedure to installing the HDD.

This HDD was formatted before installment.

Thanks,
Rad

[Mr Spock]

I believe that requires an 80 gig hard drive.
Other then that check the jumpers are set for either cable select or master.

[Don Larson]

When I do an HDD replacement I do clear+3-nvram flags clear, clear+3-intialize hdd, clear+3-partition. Update firmware with usb. Do an 08-690, reformatt\ hdd. Do 08-1119 if ntwk connected to restore network settings, if not 08-692, then do 08-947 which sets your new new firmware. Done. 352's use a 40gHDD as standard but will work with an 80g.

[ivovb]

Hmm, and why 692 - panel calibration. I suppose you are doing 693 - network initializing.

HDD must be at least 40Gb. Originally it is 40 Gb. But I have had successfully used 80 Gb HDDs.

Procedure:

(1) Create partitions. (In case of using the download jig, this is not necessary.)
While pressing [3] and [CLEAR] button, turn the power ON.
When “Firmware Version Up Mode” appears on the LCD, key in [3] and press the [START] button.
(2) Format the HDD. (Setting Mode (08-690: 2))
(3) Update with the download jig or USB storage.
See 􀀉 P. 6-1 "6. FIRMWARE UPDATING" for details.
(4) Format the HDD. (Setting Mode (08-690: 2))
* When the FAX unit (GD-1150) is installed.
Start up with the FAX Clearing Mode (1*)
Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing
Mode.

You have to check your HDD in a PC if it is working at all. Also HDD must be set for cable select!

BR

[Don Larson]

Toshiba switched from Maxtor because of all of the issues with them and are now using Western digital. I personally would not use a used Maxtor. I have not had any issues when I install a new WD HDD.

[ivovb]

Toshiba switched from Maxtor because of all of the issues with them and are now using Western digital. I personally would not use a used Maxtor. I have not had any issues when I install a new WD HDD.

WD is too hot. I prefer Seagate or Hitachi.

BR