Toshiba 3511 unknown connector

wd40/hoehandle · 04-28-2009

Putting toshiba 3511 back together and have unknown connector, ten pin female with grey black grey black and two greys on opposite end. Any
info would be appreciated. This is coming into top of main logic. Could this just be an optional harness?

Thanks

Sbarro · 04-28-2009

It can be connector to the fax which is just above.

Mr Spock · 04-29-2009

It might be the connector for the ui panel that goes into the plug in the upper right corner of the pwb?

ToshibaTech · 04-29-2009

What error code do you get when you turn it on? That might give you some hints as to where it goes...

decimal · 04-29-2009

It's connector of finisher .If you don't use finisher ,forget it !!

ivovb · 04-29-2009

	Quote:			Originally Posted by decimal
	It's connector of finisher .If you don't use finisher ,forget it !!

Yes it is. It goes to the IPC board - 1-2 inch board mounted on LGC board (on the right side looking the machine from behind).

Also it will be easier if we have photos of this.

BR