+ Reply to Thread
Results 1 to 2 of 2

Thread: E-Studio 28

  1. 06-10-2009 #1
    TeaRex714
    TeaRex714 is offline
    Junior Member TeaRex714 is on a distinguished road
    Join Date
    Jan 2009
    Location
    Houston
    Posts
    4
    Rep Power
    0

    E-Studio 28

    Just looking for advice before working on an Estudio-28 that needs developer. Is this a job for the truly experienced Toshiba guy, or is it pretty straight-forward? Should you always peplace the drum when you do developer, or is it like doing the waterpump while you're replaceing the timing belt (for any other gear heads like me...)...just do it since you're already in there?
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
  2. 06-11-2009 #2
    ivovb
    ivovb is offline
    Service Manager 250+ Posts ivovb is building a good name for himself
    Join Date
    Apr 2008
    Location
    Sofia
    Posts
    278
    Rep Power
    6
    If you have to change only developer - it is easy. Remove old. If you are using vacuum cleaner don't forget to de-attach toner sensor. Make doctor-sleeve gap 0,4. In 05 mode do code 200.

    Voila.

    BR
    Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
    Reply With Quote Reply With Quote  
+ Reply to Thread
« Toshiba E-Studio 200 | es3511 washed out copies »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules