Studio 1600/2000/2500

[KHAN]

Hello , Each time when i make copy my studio 2500 asked for paper size, I have already fixed it on A 4 and bypass on folio,
Machine default, cassette setting select the size and press set botton.
But each time it ask for the paper size when i press START,
Please need help?
THANKS

[Harry]

hollo
go in programm inizial setup then copysetup aps ams mode select no then set then you have to reboot the copier. its ok if you dont see aps mode in the display.
have a nice day

[KHAN]

Marci,THANKS Harry i already did so OFF THE APS but still the same result asking for paper size when Press START .

THANKS
GOOD WEEKEND.

[TTL]

that happens when you make copies from RADF or from the glass? or always?
if is from the glass check if the sensors of scan are working properly.

[KHAN]

Thanks for help friends,
What i do when i turn OF F the APS function i just press the set ,but this time after the set botton i turn OFF the copier and the APS function goes to OFF position, Now when i turn ON the copier it shows A4 size on display and the problem solve,
THANKS TO ALL.

[Harry]

Hi Mister Khan i Wrote in my Repley to turn of the copier ! If not The setting will not acept!
A nice Day to you