Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Technician
    Join Date
    Jul 2008
    Location
    Sydney
    Posts
    23
    Rep Power
    32
    Hi Oronoco, and all the other people who replied to my questions,

    I managed to locate the sensor and clean it with your guidance.

    Thanks very much. I really appreciate it.

    Jason

  2. #12
    carrie7502
    Guest

    check color toner cartridge problem

    Quote Originally Posted by ToshibaTech View Post
    It's the receiving tray, pull it off, there are two sensors over the revolver unit. One towards the middle is the density sensor. You can open it manually and blow it out with air. One towards rear of machine is toner detection, blow it off with air. (You'll have to remove them, a few screws) to clean them well.

    You will have to pull finisher and bridge off if the machine has one, two screws for recv. tray.


    Well, thanks for all the info's....see what I can do to fix this problem...

  3. #13
    peoute
    Guest

    Re: Toshiba 4511 Check the color toner cartridge

    Thanks for the great info! I have an eStudio 3511 that had the same error message. I was able to follow the info on this thread and clean the sensor. . . eek!! there's a lot of toner floating around in there.

  4. #14
    2cu
    Guest

    Angry Re: Toshiba 4511 Check the color toner cartridge

    How do you remove the receiving tray? I took off the two screws but it does not slide off. Thanks for any help out there.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here