Toshiba 452 after 25-30 copies coming "wait"

[waqas_pk]

On toshiba 452 after 25 to 30 copies appearing "wait" on lcd for some time and copies are stopped after some time machine gets ready again and starts copying again. i try to rebuild database by 08-684 then 08-947.and i also did format hdd by 08-690.i checked the toner supply ratio and its ok. and i also checked the toner feeding and thats ok too. Any idea or any solution plz....

[_CopyGirl]

Replace HDD and firmware.

[hoff247]

Check fuser temps. I have seen this a few times on machines where techs set fuser temps too low. I normaly set mine on 190 C. Anthing lower could cause your problem.

[Mr Spock]

How much toner is in the bottle???? Just because the tcr is correct does not mean that the toner is available.

[ToshibaTech]

My money is on gunked up thermistors.

[waqas_pk]

thanks for replying .Mr. hoff247 i have already checked fuser temp and it was OK. and Mr Spock dev drum toner is replaced with new parts . and only thermistors i did not checked now i have to check the thermistor also, may be this suggetion works .again very thankfull to All you seniors.

[ken5]

not only 452 in e35 also hving this type of problem
try to replace the hdd

[mitsubee]

Replacing HDD doesn't help at all.....Try on toner & heater issues...

[levino]

hai

replace the power pcb

[ken5]

if still cannot
u only need to replace the thermistor only