Estudio Controller GL-1020

[Jack123]

I am doing a recovery on my GL-1020 controller and when I get 50% (approx) way through I get error. After the error the process bar skips to 100%. Also it is a brand new hardrive and the partition cd works fine. The Error is listed below. Please advise.

Thanks

Something to this effect
"HDC command error: {DriveReady SeekComplete Error} "

[Mr Spock]

what size hard drive are you using? These only supported 20-40 gig drives and then only the correct heads-sectors-cylinders or they will give this error.

[ivovb]

In addition to Mr Spock,
check drive setting - some of them working with master some with cable select setting.

BR

[Jack123]

	Quote:			Originally Posted by Mr Spock
	what size hard drive are you using? These only supported 20-40 gig drives and then only the correct heads-sectors-cylinders or they will give this error.

Ohhhh Thanks for the info... you happen to know Master or Cable Select effects it too?

I was using like an old 250 gig I had laying around.