i gig usb or smaller will work
i gig usb or smaller will work
I fix copiers ...Well Sorta
I think the smallest I have foune at Frys electonics is 2gig. I will call
around town and look for the 1gig.
Thanks Fireater
DR
I use a SD card and reader, works fine on ebridge 1, 2, 3... You can try different combinations of SD cards and readers.
ToshibaTech,
I'm afraid I have not heard of that method. What is the SD card and
reader? And ebridge sounds like some type of software?
I have not had the benifit of going to any of the Japanese factory schools
or dealer classes. Is that similar to the flash card used by ricoh?
DR
I'de like to hear a little more of the sd method... did not know this was possible except with USB drive. EMujo
u need a usb to sd card stick.... tried it once didnt work for me ... wallmart usually has 1 gig flash drives for 10 bux
I fix copiers ...Well Sorta
It's hit and miss you just have to try what you have but yes USB card readers will work (probably not all brands) we have a customer that prints right off their camera SD cards on a newer machine using a reader. I have heard that you can also use USB HDDs. There's not a whole lot of point to that, but I just use the SD card reader because I had it and it happened to work. Funny thing is the card reader would not work on my laptop but works on another computer and in all the toshibas... hit and miss like I say.
um desert rat ebridge is what toshiab has called there machines since the estudio 3511 / 350 series
3511 350 280 = ebridge 1
351c 352 282 = ebridge 2
etc
I fix copiers ...Well Sorta
ToshibaTech,
I have a flash card with my compaq laptop. Not sure on how to use it
tho. I will have to look into it. As far as walmart that is good to hear.
I will have a look today if I get the chance.
There is so much to these machines now a days it hard to keep up with,
I mean it really bites into my fishing and camping time.
Thanks for your inputs. At the moment I have other fires to put out.
And will fall back on this in a day or two.
DR
Bookmarks