+ Reply to Thread
Results 1 to 5 of 5

Thread: estudio 452

  1. #1
    Trusted Tech 50+ Posts RSCA is on a distinguished road
    Join Date
    Jul 2008
    Posts
    54
    Rep Power
    4

    estudio 452

    The machine was not in service for about 2 years. Was in an office networked with fax and scan options. Now moved into home office. Not connected to network or fax line. Machine starts up, fuser heats but says "wait". Also say "Network Initializing". No other errors present. Any ideas? Thanks.

  2. #2
    Service Manager 250+ Posts ToshibaTech is building a good name for himself
    Join Date
    Apr 2007
    Posts
    286
    Rep Power
    9
    You can do 08-693 to reset the NIC, might get rid of the Network Initializing message. As to the wait, it could be the HDD you can try 08-690 (2) to format the HDD. You'll lose any stored phone number, templates, etc... but if it formats it will still fire up.

  3. #3
    Repair God? not quite 100+ Posts fireater is an unknown quantity at this point fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    103
    Rep Power
    0
    sounds like hdd
    I fix copiers ...Well Sorta

  4. #4
    Trusted Tech 50+ Posts RSCA is on a distinguished road
    Join Date
    Jul 2008
    Posts
    54
    Rep Power
    4
    Formatting the hard drive created a system error "2". I can buy the hard drive from Hytec but need the system software. Can anyone get that for me? Thanks.

  5. #5
    Repair God? not quite 100+ Posts fireater is an unknown quantity at this point fireater's Avatar
    Join Date
    Apr 2006
    Location
    Winnipeg
    Posts
    103
    Rep Power
    0
    get a generic hdd from the computer store as for firmware pm me with a ftp i will send .... file is big so make lots of room
    I fix copiers ...Well Sorta

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts