estudio 280 & drivers

[officework13]

i am looking at updating my drivers for my copier. (i am adding the scan capeability and fax)
my current drivers that i have are from the original discs a few years ago.
i was told to install the drivers from cleient utility CD ver 1.50

does my copier need to have a certain firmware version with these drivers.

i read somewhere that the e-bridge controller must be at firmware version T371SY0X4006 or higher to be compatible
my firmware version is T371sy0u370.
M-Rom ver. 371M-14
s-rom ver. 371s-06

any info appreciated.

[Mr Spock]

That is about 3 versions old and the ver4006 is the latest. I would recommend it and just download the driver/full installer form the following website:

Downloads | Drivers | Toshiba Copiers

as to the firmware you will need a tech registered with Toshiba to get the firmware for you or have them do it.