E Studio 210L

[Bill T.]

Tring to find out what error code C38 is on this unit.
Many Thanks.

[ivovb]

Generally it is:

Auto-toner error (K)
Is the harness between the LGC board and the EPU drawer connector open-circuited?
Is any harness inside the EPU or the auto-toner sensor harness open-circuited?
Is the auto-toner sensor connector or the connector J120 on the LGC board disconnected?
Reconnect the connector. Replace the harness.
1. Replace the auto-toner sensor.
2. Replace the LGC board.

But first check main corona (K) for breakage and if it seated right.

BR