mita dc-3060

[gazza]

got manual but forgot how to enter sims
just about to do drum and dev change

[Spank6482]

got manual but forgot how to enter sims
just about to do drum and dev change

10871087 should get you into the simulations, the book should lay it all out after that.

[manuel jolon]

got manual but forgot how to enter sims
just about to do drum and dev change

for service mode 10871087 display show simulation number to put 60 with key number + start +enter and run simulation

[wild bill]

What does this mean?
I've worked on a lot of copiers but by far this is mystifying. what does it mean. Is it arbitrary or is there a secret to the code? How about CROP or COOC, CIOI. I think that 1087 1087 is hard for customers to accidently input. I have had customers get into Toshiba by pushing 05. The tech had to have left the code active and never had powered down. If anyone has any clue lt me know!

1087 1087 is a cool name I think I'll change mine to 05 power up.

[troyboy]

To get into the simulation mode, when the copier is fully on, type "10871087" That should get you into simulation mode. hope that helps!!!

Troyboy