hi all

[mr_toshiba]

hi all
I have a Toshiba E-STUDIO 250 my problem is over tonar how i can adgust toner suplauy
already replaced dev tank The problem persists. HELP ANYONE

[manuals4you]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com

[ivovb]

	Quote:			Originally Posted by mr_toshiba
	hi all I have a Toshiba E-STUDIO 250 my problem is over tonar how i can adgust toner suplauy already replaced dev tank The problem persists. HELP ANYONE

Let's say it is a bug. You have to check if your machine has these by-pass cables going from macine to the right door (one black and one red). Also clean all of the contacts on PU and relevant in the machine.

BR

[Harry]

Ok Mr. Please check Side Door at front there are connections for high voltage on the rear side. Somthimes there is allot of space at front so you have to put a large screwdriwer at the front hinge turn it arround to reduce the space. Another one is the sensor contact in the pcu have check and ajust the contact of the toner sensor at the left under side of pcu one screw and it flips away.Make shure there is a good connection.
good luck harry