hi
my copy machine not work
when i press c+8 shows c45
please help me for reset the machine
thanks
hi
my copy machine not work
when i press c+8 shows c45
please help me for reset the machine
thanks
i press 0+8 and power on
when Ad shows to screen
i press 400 and Start
then 6 shows to screen
i press 0 and start
now what i do?
may be its from tuner
because the lamp of tuner before it was ON
please help me
i want to reset my machine but not work
i press8+0 and turn on the machine
then press 400 and START
then press 0 and START
turn it Off
but not work
please help me
When you set it back to 0
Press set instead of start
80 press and on
press 400
press start
press 0
press interrupt
off/on
If a fuser code reset does not work, perhaps you might consider diagnosing the cause, rather than focusing on clearing the code temporarily? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks