Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 0
estudio 200 - Auto low power problem
I can not set the Automatic low power function on the printer. I go into the timers section of the copier menu. It shows Auto clear, Auto low power and Auto sleep. Auto sleep shows up in regular lettering, but auto low power and auto sleep, shows up in dotted lettering. I highlight auto power and then press set and nothing happens. How can I activate these two modes.
Any help is appreciated.
Thanks Scott
-
Senior Tech
100+ Posts
- Rep Power
- 36
This has to be reset in service mode. Someone has them disabled.
-
Technician
- Rep Power
- 0
Thank you for you response. How would I find out how to get into service mode to change the settings?
I just hate having the heated roller on all the time, wasting electricity and wear & tear on the machine.
Thanks Scott
-
Technician
- Rep Power
- 0
Got it to work. Had to hold 0,8 down and then turn power on. Then go into the settings to turn back on.
Thanks for the help.
Scott
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks