Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    Mar 2010
    Posts
    14
    Rep Power
    29

    Unhappy es305 estudio305 e studio 305 - NJ1031 Stitcher - Intermitent low offset of 1st page.

    Brand New Installation

    eStudio 305 - NJ1031 Stapler

    when running 10+ sets of say 5 pages. after first few sets all OK, then every 3rd or so set will have a lowered 1st page (of course out of line with set) stapled to an otherwise normal set.

    Any Wisdom?

  2. #2
    Service Manager 100+ Posts Claudio's Avatar
    Join Date
    Feb 2007
    Location
    CA
    Posts
    235
    Rep Power
    37
    Eliminate the paper first to be sure it is not the cause.
    If the paper is humid (getting curled after fuser), it could be contributing to it.
    Also check for rough edges on the paper being used.
    **Try paper from an unopened ream & then maybe even a different brand.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here