Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 29
es305 estudio305 e studio 305 - NJ1031 Stitcher - Intermitent low offset of 1st page.
Brand New Installation
eStudio 305 - NJ1031 Stapler
when running 10+ sets of say 5 pages. after first few sets all OK, then every 3rd or so set will have a lowered 1st page (of course out of line with set) stapled to an otherwise normal set.
Any Wisdom?
-
Service Manager
100+ Posts
- Rep Power
- 37
Eliminate the paper first to be sure it is not the cause.
If the paper is humid (getting curled after fuser), it could be contributing to it.
Also check for rough edges on the paper being used.
**Try paper from an unopened ream & then maybe even a different brand.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks