Hi,
I have a toshiba E-Studio 603, when I plug it in and start it up, it says can not find HDD data, I cleared the nv flags in 03 mode, still gives same error. Any help appreciated.
Thanks in advance
John
Hi,
I have a toshiba E-Studio 603, when I plug it in and start it up, it says can not find HDD data, I cleared the nv flags in 03 mode, still gives same error. Any help appreciated.
Thanks in advance
John
Try this order:
1. Check cables that goes to HDD on both sides (HDD and PWB side).
2. Re-format HDD.
3. Re-load firmware.
4. Replace HDD and and re-load firmware.
5. Replace Sys board.
BR
You have lost the hdd data obvious and possiblly the o/s
c/3 select option 3
format hdd load firmware via usb if this does not work you will need recovery jigs to restore operating system whoops!
Hard drive ended up being bad, put a new one in and reloaded it this morning, is working fine now, Thanks
Nice to see some feedback. Haven't see for a long time.
BR
Better than " I rily has not tried anythng that was posted, prease send firmware to my email adres and cope of servic manul plese..my email adres is sometechwanabe@bumf***.com" Emujo
Bookmarks