After HDD replacement, initialization, and firmware reload (HDD and UI f/w per manual instructions), the machine will not let you enter the admin mode password, the screen comes up with the password field, but when you try to key in the code, it will not accept any input as if you were not even pressing any buttons (you can hear them beep, but no asterisks appear in the password field as you try to enter numbers).
I put back the old HDD, and it did the same thing, so I'm thinking maybe something with the firmware update when the new HDD was put in?
Anybody seen this before?
You can access admin mode from top access ok, the default 123456 admin password gets you in, just not from the copier.
Bookmarks