Thanks: 0
Likes: 0
Dislikes: 0
HAs anyonr had a C26 that was not resolved by replacing the lens assy and SLG bd? This one is stumping me...Also replaced lamp and inverter board on the off chance that lamp was dimming, but no success. SLG board was new out of box, but lens assy was "repaired" by HYTECH. But I must state that HYTECH has never let me down before. Wanted a 2nd opinion before I re-order the lens assy and SYS bd. Emujo
Check/replace cable between lamp and inverter. It might be strange to You but check also home sensor.
BR
Call Mike at Hytec's tech support before you order a new one. His ext is 3079
I had one on another model which ended up being the Power Supply.
I will not give you service manuals or firmware.
I have had the ccd assembly be bad straight from Toshiba (not a hytech repair) so I would guess so...
And Star Trek was just a tv show...yeah right!
Believe it or not, I've had C-26's that were just dirty exposure lamp and optics...
OC
I have too but I know the author of this post and me may not always fix the machine but his machines are spotless!!!Originally Posted by Oystercopy
And Star Trek was just a tv show...yeah right!
You're too kind...$10 is in the mail..BTW I still show that cleaning rod in my inventory!!!
This may sound odd but i've done it a half dozen times....Take a bright flashlight (Preferablly LED) and shine it straight through the lens for about 10 or 15 seconds then reboot copier..I've even fixed c26 by shining flashlight on mirror 2 right in the middle so the strongest light reflects through the lens.. It's ok to laugh..But it does something to the ccd to correct... Don't get me wrong. I've replaced many lens/ccd/slg boards but give it a shot
Turned out to be a bad SLG bd, 1st SLG was bad out of box. Thanks for the tips. Emujo
Reply With Quote
Bookmarks