Estudio 205L,255,305,355,455 rant

[jamesyboy]

Yes drastic plastic but this is now a trate we will all have under green issues and company profile recycled plastic!!!
have loads of these machines had early problems with fuser jams and people breaking stuff clearing jams
fitted scrapers from a 233 and cured the problem new scrapers are now issued and ok
theres a few mods and clever codes that make them run good

[minhkhanh]

Yes drastic plastic but this is now a trate we will all have under green issues and company profile recycled plastic!!!
have loads of these machines had early problems with fuser jams and people breaking stuff clearing jams
fitted scrapers from a 233 and cured the problem new scrapers are now issued and ok
theres a few mods and clever codes that make them run good

Show us if you have any experience

Thanks

[jamesyboy]

ok I will post the codes soon ewhen I get back yo wok ;
Change the fuser scrapers(use 233 scrapers) increase edge voids( dont trust the code check and adjust by making sky copies) reduce fuser temp by 5 degrees detone the machine
will post codes soon

[digivision]

hi dear.
pls can i know the e 255 toner chip detection code,
thankx & BR