Toshiba estudio 351c make sharper and clera copies????

[omns23]

I have a toshiba 351c making clear copies but sharper and low quality copies in black and colors copiers anybody have idea ?

how ti fix?

have any code? to adjust the toner

[randandrawson]

not understanding your question?

[tinnyjay]

I have a toshiba 351c making clear copies but sharper and low quality copies in black and colors copiers anybody have idea ?

how ti fix?

have any code? to adjust the toner

3.2 Adjustment of the Auto-Toner Sensor When the developer material is replaced, adjust the auto-toner sensor in the following procedure. (1) Install the cleaner and developer unit. Note: Do not install the toner cartridge. (2) While pressing [0] and [5] simultaneously, turn the power ON. The following message will be displayed. 100% A A3 TEST MODE [0] [5] [POWER] → (3) Key in a code and press the [START] button. Code 200: All developer materials 201: Developer material Y 202: Developer material M 203: Developer material C 204: Developer material K 206: Developer material Y, M, C

this is from SM

[Mr Spock]

If it prints good from a pc then it is the optics need to be checked/cleaned/adjusted.
If not then it may need service to clean the laser, replace the developers, or 100 other issues with the machine.

[ToshibaTech]

If you are saying that your black copies are better looking than the color copies that is pretty normal for these. The color quality is not all that great on a multi pass machine generally speaking. These are basically a "black and white machine that can do color" or a "business color machine."

[digivision]

HI dear, I have service manuals for all the estudio models. ill give u @any time,

Tc, Bye, Contact me on +94 772248606

[bellsysjoe]

you can call me I am a tech 704-562-1543 can help you

[ToshibaTech]

Well at least you did ask for it!

[jamesyboy]

a clean machine is a mean machine!
these machines are good if looked after well,clean optics!,remove and clean laser ,clean and apply conductive grease to the revolver bias terminal,run iqc 08-396 calibrate it properly 05 4 fax 1642,70 fax 1008