Hi folks, I just bought a 280 copier (used) and it printed fine for about 60 pages, then it displayed an error replace toner, I pulled the old one out, and it still had plenty in it, but I replaced it with a new one anyway.
It still displays the same error. Ive pulled the whole drum assembly out and looked inside at the toner reservoir, and it is full, I pulled the sensor from under neath to make sure its clear and it was fine as well..
My question, what could the problem possibly be, I even hand filled the machine reservoir completley, it went through its initiation cycle, then flashes replace toner cartridge
Any help would be greatly appreciative
Steve
Bookmarks