Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Apr 2009
    Location
    salvation
    Posts
    50
    Rep Power
    0

    Toshiba e-stüdio 230

    After taking a copy of each (bypass and tray) paper jam in the show is the reason?
    please help.....

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Apr 2008
    Location
    Sofia
    Posts
    695
    Rep Power
    42
    When there is paper jam press both CLEAR and 8 and see what is the code - E___?

    BR

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Apr 2009
    Location
    salvation
    Posts
    50
    Rep Power
    0
    e 550

  4. #4
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96
    Pull the verticle transport area apart and do some deep cleaning, you may find paper, dust, toner, sensor flags with nicks on them etc. All these can contribute to the jams you are getting. Emujo

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Apr 2007
    Posts
    591
    Rep Power
    41
    Usually e550 is the sensor underneath the bypass. Get down on the floor and locate the thin black plastic plate directly under the bypass (open/remove transport door.) It's held on by two screws and the sensor is a sensor/actuator all in on, same sensor that is in a duplex unit.)
    I will not give you service manuals or firmware.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Apr 2009
    Location
    salvation
    Posts
    50
    Rep Power
    0

    Answer by thank you to everyone.

    sensor unit is rusted at the bottom of corona

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here