After taking a copy of each (bypass and tray) paper jam in the show is the reason?
please help.....
After taking a copy of each (bypass and tray) paper jam in the show is the reason?
please help.....
When there is paper jam press both CLEAR and 8 and see what is the code - E___?
BR
e 550
Pull the verticle transport area apart and do some deep cleaning, you may find paper, dust, toner, sensor flags with nicks on them etc. All these can contribute to the jams you are getting. Emujo
Usually e550 is the sensor underneath the bypass. Get down on the floor and locate the thin black plastic plate directly under the bypass (open/remove transport door.) It's held on by two screws and the sensor is a sensor/actuator all in on, same sensor that is in a duplex unit.)
I will not give you service manuals or firmware.
sensor unit is rusted at the bottom of corona
Bookmarks