Toshiba Estudio 351C Margins Adjust

[jcontractor]

Hi,

I need help with margin set, for individual paper size or individual paper cassette.

I change the 08-437 and 08-436, but this setting change for all papers sizes.
I need to change individually, one side printing only.

In copy mode I just print good (Margins well), but is in printing mode that I have problems.

any help will be appreciated.

[michaelc]

If you want to change the voids on the machine (lead, trail etc), I am sure it will apply to all paper sizes. if you want to try and play around with all the settings you might mess the machine up. If you dont have a manual for all the codes, i dont give it out but no doubt the guy who does will post on another feed or this one.

[jcontractor]

If you want to change the voids on the machine (lead, trail etc), I am sure it will apply to all paper sizes. if you want to try and play around with all the settings you might mess the machine up. If you dont have a manual for all the codes, i dont give it out but no doubt the guy who does will post on another feed or this one.

I repair the machine. I run the complete calibration.