Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts lightningjeremy's Avatar
    Join Date
    Jul 2009
    Location
    sarasota,fl
    Posts
    139
    Rep Power
    18

    toshiba e studio 2500c hard drive replacement

    what procedure and software is needed to replace the hd on this model?


  2. #2
    Service Manager 1,000+ Posts
    toshiba e studio 2500c hard drive replacement

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo East
    Posts
    1,222
    Rep Power
    35
    When you replace HDD, the next step is to prepare that hdd for loading firmware.
    From documentation "Clear the partitions on the HDD.
    1. Turn the power ON while pressing [3] and [CLEAR] button simultaneously.
    2. When “Firmware Version Up Mode” appears on the LCD, key in [3] to select “ 3: All Partition
    Delete and Create Loader Partition. ” and then press the [START] button.
    3. When “Initialize completed.” is displayed on the LCD, clearing of the partitions is completed.
    Turn the power OFF.
    Update the master data using the USB storage device."

    You'll need firmware for specific machine. Then you save that firmware on USB stick, put stick into machine, and turn on while holding 4 and 9.


  3. #3
    Senior Tech 100+ Posts lightningjeremy's Avatar
    Join Date
    Jul 2009
    Location
    sarasota,fl
    Posts
    139
    Rep Power
    18
    does anyone have the part number for the hd? took the number of the drive, but it comes back invalid part number.


  4. #4
    Service Manager 1,000+ Posts
    toshiba e studio 2500c hard drive replacement

    bojans's Avatar
    Join Date
    Feb 2008
    Location
    Sarajevo East
    Posts
    1,222
    Rep Power
    35
    It's standard 80GB hard-drive..


  5. #5
    Senior Tech 100+ Posts lightningjeremy's Avatar
    Join Date
    Jul 2009
    Location
    sarasota,fl
    Posts
    139
    Rep Power
    18
    thanx


  6. #6
    Junior Member
    Join Date
    Jun 2015
    Posts
    6
    Rep Power
    0

    Re: toshiba e studio 2500c hard drive replacement

    hello
    i format the hdd and create a partition ntfs on my new hdd.
    i plug it on my 2500c and when i try to do " 2. When “Firmware Version Up Mode” appears on the LCD, key in [3] to select “ 3: All Partition
    Delete and Create Loader Partition. ” and then press the [START] button. "
    i have :

    Firmeware Version Up Mode
    initialyze error.

    what have i to do ?

    (2) format loader partition
    (1)clear nvram flags




    Then i plug the key usb and do upgrade but
    -os ui update completed
    -engine main update completed
    -scanner firm update completed

    but hdd sys update .....not....

    thanks


  7. #7
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,020
    Rep Power
    83

    Re: toshiba e studio 2500c hard drive replacement

    You need to start with a blank, unpartitioned drive. The MFP needs to do the partitioning through the 3/C mode. Once complete perform a logical format 08/690 then load firmware. The only data you must load is the HDD and UI info, but you can install all. If you have he most current firmware and the MFP was never kept up to date then you will need to either perform the updates step by step, or try to find the version you are at. Emujo

    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here