Toshiba 1710 registration & lead edge void

[blackcat4866]

This should be an easy one for you toshiba guys. I'm working on a 1710 with no lead edge void & registration leads the copy by 2mm. How do I adjust the registration & lead edge void. I figured out the, hold 05 while powering up to get to the adjustment mode. What next?

[dbrownlee]

Registration is 05-53. Range 00-15, 8 is default. M0ves 1/2 mm per step. Interrupt to save, 34 together to test copy. 05-56 is byp reg, same range.05-27 is L.E. void, range 00-15, default is 8. Same setting/test procedure as above. Hope that helps, Dave.

[blackcat4866]

Thanks! I won't see this machine for ~10 days (I'm in school). I'll try it when I get back.

[blackcat4866]

Thanks, dbrownlee!
Worked like a charm!