Toshiba Estudio 282 machine keeps saying "close front door" however all doors are closed. I've checked already the front door switch and it seems working properly. Any other reasons for this indication in the display? tnx, eric
Toshiba Estudio 282 machine keeps saying "close front door" however all doors are closed. I've checked already the front door switch and it seems working properly. Any other reasons for this indication in the display? tnx, eric
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com
Paul@justmanuals.com
Look for a hole in the front when the doors open where a microswitch should be right under a label that has the S/N and model. Usually gets pushed in.
You will need the little micro switch also activates or you wont get your 5v like gregg said.
It didn't say that I couldn't do it in the manual.
Also check the fuses on the power supply. If one of these is blown that is the message.
And Star Trek was just a tv show...yeah right!
CLOSE FRONT COVER
Mostly the problem of power supply.
check the power supply.
Tnx Sir's for the advice, I've got it working yesterday. The problem was on the power outlet, i test the voltage and it gives me 110v only. My bad i haven't check it first from the start. Again tnx!
Bookmarks