Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 35
  1. #21
    Field Supervisor 500+ Posts
    Join Date
    Apr 2008
    Location
    Sofia
    Posts
    695
    Rep Power
    42
    Quote Originally Posted by alexi_issa View Post
    ok 10x but i know this code but i have a problem with my HDD.
    If U talking about e450 U will need (as Mr Spock says already):
    1. new 40Gb HDD PATA set for cable sellect.
    2. firmware to load in HDD.

    If U talking about e45 just change the HDD. U might need UI firmware but it depends of user language that U need to set on display.
    BR

  2. #22
    Trusted Tech 50+ Posts
    Join Date
    Nov 2007
    Location
    Gaza
    Posts
    67
    Rep Power
    34
    F100 is about HDD Initialization. 08 - 690 is the code for formatting. Reboot the machine occures if HDD is formated successfully.IF an error occured, Replace HDD.











    Toshiba has no Technical support in Pakistan But......Main Hoon na

  3. #23
    Trusted Tech 50+ Posts
    Join Date
    Nov 2007
    Location
    Gaza
    Posts
    67
    Rep Power
    34
    Its HDD Format Error. 0+8 ---690 is the Code to format HDD.It will take 15 to 40 seconds to show reboot the machine.If it never comes and machine remains "wait" Position, Replace the HDD.










    Toshibians in Pakistan.......eat my dust.

  4. #24
    Trusted Tech 50+ Posts arriva1's Avatar
    Join Date
    Apr 2007
    Location
    tampa,florida
    Posts
    66
    Rep Power
    35
    F100 Other service call HDD format error: HDD cannot be initialized normally.
    P. 5-91
    F101 HDD unmounted: Connection of HDD cannot be
    detected.
    P. 5-91
    F102 HDD start error: HDD cannot become ‘Ready’ state. P. 5-91
    F103 HDD transfer time-out: Reading/writing cannot be
    performed in the specified period of time.
    P. 5-91
    F104 HDD data error: Abnormality is detected in the data
    of HDD.
    P. 5-91
    F105 HDD other error P. 5-91
    1st try to reformat hard drive With 08-690
    [F100] HDD format error
    (1) Check if the HDD is mounted.
    (2) Check if the specified HDD is mounted.
    (3) Check if the connector pins of the HDD are bent.
    (4) Check if the power supply connector is disconnected.
    (5) Check if the connector J111 on the SYS board is disconnected.
    (6) Replace the harness.
    (7) Initialize the HDD. (Key in “2” at 08-690.) (I would try this first)
    (8) Replace the HDD.
    (9) Replace the SYS board.

    Last edited by arriva1; 04-30-2008 at 03:25 AM. Reason: more info

  5. #25
    Trusted Tech 50+ Posts
    Join Date
    Nov 2007
    Location
    Gaza
    Posts
    67
    Rep Power
    34
    Yes it can be reset. The Trial Period in 350/450 , 352/452. I have done it.














    In Pakistan Toshibians are eating my dust.

  6. #26
    burakco
    Guest
    Quote Originally Posted by Nazakat View Post
    Yes it can be reset. The Trial Period in 350/450 , 352/452. I have done it.

    how did you do it,can you tell me?

    you can mail me to burak_co@hotmail.com or here . . .

  7. #27
    burakco
    Guest
    Quote Originally Posted by Mr Spock View Post
    Hard drive failure. You will need to replace and reload the operating system (firmware on this model).

    how can i replace and reload the operating system? could anybody explain to me?

  8. #28
    Senior Tech 100+ Posts jawir's Avatar
    Join Date
    Aug 2007
    Location
    Jakarta
    Posts
    107
    Rep Power
    35
    Hi,

    F100 is problem in HDD. You can try format it by using 08+690 than input value 2 to Format the hardisk than press start button. Wait until reboot the machine appear in the control panel. after that reboot the machine. if this cannot solve the problem, you may change HDD with the new one.

    regards

  9. #29
    yemifest
    Guest

    e-studio 351c CEB0 error code

    Hi my friends
    please kindly tell me what CEB0 error code on toshiba studio351c 0r 3511 means ...

  10. #30
    Trusted Tech 50+ Posts
    Join Date
    Nov 2007
    Location
    Gaza
    Posts
    67
    Rep Power
    34
    Brother

    Its Black Developer unit lifting movment Abnormality.Possibly cause by Little cover under the Waste Bottle. Check the cover and adjust it.
    Black Developer contact position detection sensor or Black developer contact timing detection secsor can cause this problem. Check and rectify.





    In Pakistan Toshibians are eating my dust

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here