hi,
pls tell me reset code for e-studio 25-35-45.my email is etc_new@hotmail.com and ets_multan@yahoo.com
hi,
pls tell me reset code for e-studio 25-35-45.my email is etc_new@hotmail.com and ets_multan@yahoo.com
Hello Jawir,
I want to reset code for refresh copier,PM counter and any one you have.
Hi,
for reset the pm counter you can use 08-252 you can put zero in there. For reset the drum counter, fuser, and wire you use 6-start than choose 2 for drum, 3 for wire and 4 for fuser.
regards
thanks Jawir,
but What Is 6-start To Reset Drum,wire And Fuser Can You Explain In Detail Please ?
HI,
6+Start is PM support mode. the easy way to reset drum/wire/fuser. Beside that you can reset in 08 mode.
Just easy way put the code (2/3/4) than control panel will appear initialize and cancel for confirmation. just push initialize for resetting.
regards
Hi,
For make sure this:
6 (button) and start (button) press together.
regards
thanks For A Usefull Information,
you Mean That I Press 6+start Together And Then Trun The Copier. What Is 2/3/4 Code For ?
thanks A Lot.
Hi,
As I mention before. based on the each code is for resetting :
1. For auto toner adjustment
2. Drum life counter resetting
3. Fuser unit counter
4. Charger wire separation resetting counter
Rgds
hi,
please tell me what is F100 error code at toshiba studio450...
thnks!
Bookmarks