Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 250+ Posts vincent64's Avatar
    Join Date
    Feb 2008
    Location
    Orange, TX
    Posts
    379
    Rep Power
    37

    Finisher troubles

    Have a ES 455 with the MJ 1101/c finisher with the kn 2520 bridge unit on it, it is positioned properly to the main body, but paper seems to hit at the entrance gate of the finisher, and turn down, dropping between copier and finisher, other tech that has seen this, thinks there is a speed difference of some kind, causing the paper leaving the bridge unit to not be picked up by finisher.
    Is there a adjustment for this with the finisher??
    Found something in the SM about setting speed with A4 paper, but this is a USA machine, using mostly letter size paper
    Thanks ya'll

  2. #2
    Field Tech 500+ Posts
    Finisher troubles

    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    590
    Rep Power
    37

    Re: Finisher troubles

    Does it have they mylar kit fitted to the bridge unit, if so the middle mylar on the top part of the bridge unit can get bent downwards causing problems. What error code are you getting ? EA20 or E940.
    It didn't say that I couldn't do it in the manual.

  3. #3
    Technician
    Join Date
    Jan 2009
    Posts
    34
    Rep Power
    31

    Re: Finisher troubles

    did you try to adjust finisher height?possible inlet guide is warped?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here