Hello new friends,
i changed new logic board, and now total counter meter reading different, old meter only 200k and now with new logic 400k, how can i change back to 200k.
Thank you very much
Hello new friends,
i changed new logic board, and now total counter meter reading different, old meter only 200k and now with new logic 400k, how can i change back to 200k.
Thank you very much
Follow the procedure in the service handbook (08/257). You could also try putting the original NVRAM back on the newer board (but 08 257 should correct this). Happens because the counter values are stored on 2 different bds and you must have salvaged an old board. Emujo
hello emujo,
thank you very much for your support, but i been try 08/257 tranfer back nv ram, and total count still show 400k.
did you change the eprom with the board if the eprom is from another machine it will have that value stored from previous fit the original eprom from youre machine
Let's hear it for roofing contractors! Who knew they had such a keen interest in Toshiba copiers? Wonders never cease.
Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?
If your roof leaks..water gets into copier..must be preventive maintenance. Emujo
Bookmarks