e-Studio 350/450 or 230 print/scan

[birooprema]

Hi,

I have e-Studio 230 350 and 450 without print and scanner function.

Is some option to use this machins as printer and scanner without activation USB key.

I try to buy from local dealer but they don t have this key for sale.

If someone have solution pleas post me.

[jawir]

Hi,

You can activate trial mode. this only for 60 days. after that you have to buy print/scan enabler. During that trial mode your machine can use scan/print function as you buy those enabler.

thanks and regards

Hi,

I have e-Studio 230 350 and 450 without print and scanner function.

Is some option to use this machins as printer and scanner without activation USB key.

I try to buy from local dealer but they don t have this key for sale.

If someone have solution pleas post me.

[birooprema]

Yes I know for trial mode in new machin but i dont know to setup this mode.

Some ither solution folk s


Pleeeeeees

[lucky777]

That is the only option (using trial mode) other then buying the USB. Trial might not work if it has already been activated before in that machines lifetime. It is a time only deal.

[whip]

i buy and sell various it equipment i may have an enabler that you need i can get toshiba print enablers and toshiba print and network enablers just send me a message if you are in need of the gm range

[thienquansgs]

hi jawr !!!

could you post mode active printer/scan . thanks

[atudorica]

08 - 673
change 254 to 60

[leolives]

Here is what the handbook says for trial period in 08 mode,as mentioned before change the value to 60 to enable trial for 60 days.

code- 673
Classification- General
Items- Trial Period Setting
Function- All
Default,<Acceptable Value>- 254 <0-60>
Ram- SYS
Contents- Sets the trial period from 1 to 60 days. This setting is effective only when the default value is "254". Once the default value is set, this value is only used for a reference.

[burakco]

we bought print/scan enabler gm2061 for toshiba e-450 but we didnt use it. i installed printer to pc but it is not writing my documents?

how can i use it?

[decimal]

Gm2061 not for Es350