Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
e45 don't save ip
e45 don't save ip every time i set it and restart the machine it's return to auto
e 250 test print
i have e 250 every time i switch it on a test page with it's IP is out so how can i stop this page . thanks for help
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Re: e45 don't save ip
you could try set your router to automatically give the copier the same ip address, every router is different but should be possible. (its been well over 2 years since iv looked at a e45 so i cant remember the network settings)
with the e16 if you type in the ip address of the copier in a web browser, theres a option in there to turn of the automatic network page print.
other than that, update the machines lol... atleast a es232
Cheers Cam
-
Senior Tech
100+ Posts
- Rep Power
- 0
-
Re: e45 don't save ip
If it's the embedded controller (not the GL) then you probably have a dead backup battery. You can get this at Radio Shack or the like. Ditto on the startup page...08 setting to turn this off. Emujo
-
Senior Tech
100+ Posts
- Rep Power
- 0
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks