Toshiba use a number of different Print Controllers, depending on the Copier Model and Series. Generally you can tell from the Test Sheet Setting List printout.
Let me know. I can probably give you the Setup Instructions.
can anyone assist me with a estudio 450 set up to print over the network, I have the gm-2010 enabler, but for the life of me can't get this thing to print, i can ping it show ok, it shows connected in the topaccess docmon. everything on my network looks good , am i missing something , i just added the gm2010, is there more to setup than just pluging in?
easiest way to set one up IMO is:
1. do what you have done
2. user functions > admin > 123456 > network > SMB
3. change name from mfp-xxxxxxx to something nice like "toshiba"
4. on computer go Start > Run
5. type \\toshiba (or whatever name you gave it)
6. double click on PS or PCL driver (computer will pull driver over takes 1-5 mins usually)
7. right click file_share and add a short cut
you can now print to the device and access scan to file documents via the shortcut you made. no need to set a static ip or change dhcp settings.
Basic network setup for TOSHIBA e-STUDIO 
Toshiba Estudio Printer Setup 
Linear Mode
