Hello!
everyone.......
i'm interesting & learn in basic how to do a network setup for TOSHIBA e-STUDIO.....
Any input will be really appreciated
Hello!
everyone.......
i'm interesting & learn in basic how to do a network setup for TOSHIBA e-STUDIO.....
Any input will be really appreciated
Toshiba use a number of different Print Controllers, depending on the Copier Model and Series. Generally you can tell from the Test Sheet Setting List printout.
Let me know. I can probably give you the Setup Instructions.
COPYGUY5
That for the 352
Thanks
can anyone assist me with a estudio 450 set up to print over the network, I have the gm-2010 enabler, but for the life of me can't get this thing to print, i can ping it show ok, it shows connected in the topaccess docmon. everything on my network looks good , am i missing something , i just added the gm2010, is there more to setup than just pluging in?
Mike
easiest way to set one up IMO is:
1. do what you have done
2. user functions > admin > 123456 > network > SMB
3. change name from mfp-xxxxxxx to something nice like "toshiba"
4. on computer go Start > Run
5. type \\toshiba (or whatever name you gave it)
6. double click on PS or PCL driver (computer will pull driver over takes 1-5 mins usually)
7. right click file_share and add a short cut
you can now print to the device and access scan to file documents via the shortcut you made. no need to set a static ip or change dhcp settings.
ToshibaTech
Yes!!! Thanks!
I have one 351 estudio and one 3511 on the same domain and network. I read Jamesbondlee's request and the response and tried the solution on the 3511. I have a response ok Can both of these machine co exist ok on the same network using the SMB naming technique suggested to Jamesbondlee by grafix Toshibatech ? ?
They can but the name needs to be different.
And Star Trek was just a tv show...yeah right!
hello
can any one help me how to setup scanning on toshiba estudio 4511
I ha the copier connected to network i can print with it but can not scan
I would like to use it with toshiba estudio file down loader but I can find the soft for it
thanks
Hi.
For network scan with eStudio 182, i need something else then GA 1191?
Only the printer appears on the network.
Some guys say I need GA 1201 and GJ 1160 for the network scann.
For the moment i use the machine only like a printer, by installing Toshiba Utilities.
How can settup scanner? And what software i need for scanner?
Thanks.
Bookmarks