eStudio 352 and 452 - Create Network Printers

Good afternoon to all,

I recently was asked by a client to connect their newly acquired eStudio 352 and 452 copiers to the network for printing and faxing capabilities down to the workstations. They are running across a Windows Server 2003 R2 network. The print server is loaded on an Exchange 2007 box running Server 2003 x64.

Can anyone provide some instruction or point me towards an installation document which can assist me with this task?

Many thanks in advance,
Eric

[Mr Spock]

Do they have the print enablers?????
What version firmware is on the machines???

Run the client 1 cd that comes with the machines (if new).

[Julio119]

If you need to print and scan, you need to have a gm2070 enabler. if you do setup the printing by going to UF - Administrator - password - NC and setup the machine with and IP address, once that is done go to topaccess and setup the scanning through there. if you need the enabler let me know I have one.