1370 cq repeat image

[lac14903]

I have A 1370 THAT HAS DECIDED TO TRACK THE IMAGE. It looks like eather drum ground or erase lamp. Lamp is working, machine is clean I can adjust some of it out with exposure but not all of it. been in the busness for 20+ years with Savin and Mita Need help with this thing
Thanks

[wagon]

Is 'track the image' what I would call 'offsetting' or 'image repeat'?? Maybe the drum blade? Could the fuser roller be stuffed? From what I remember 1370's were OK little machines (its been a while!). Maybe the drum is worn out and oversensitive?

[imaginGuru]

Also don't forget to clean and isolate the separator corona blocks+change wires, it's very common at this point of its life for this part to leak HV and cause lotta trouble, (faint image, repeated image, blank copies, intermitent jams...etc).


imaginGuru

[Boogotshot]

Check your drum blade to see if it is flipped. Those little things were notorious for flipping the drum blade if you didn't use enough patting powder.