Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    Ha Noi
    Posts
    57
    Post Thanks / Like
    Rep Power
    12

    Toshiba e 282 can not display

    When you turn on the fan noise is heard. But the display is dark
    I tried replacing and identify errors in sys board

    help me find errors parts to replace on board


    Thanks all


  2. #2
    Field Supervisor 1,000+ Posts


    TheOwl's Avatar
    Join Date
    Nov 2008
    Location
    Tasmania
    Posts
    1,700
    Post Thanks / Like
    Rep Power
    41

    Re: Toshiba e 282 can not display

    Does the engine go through any of the warm up stages or at least rotate the drum when you turn it on?

    If the machine isn't going through the normal warm up stages, then you could have a faulty power supply.

    Please don't ask me for firmware or service manuals as refusal often offends.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    Ha Noi
    Posts
    57
    Post Thanks / Like
    Rep Power
    12

    Re: Toshiba e 282 can not display

    Quote Originally Posted by TheOwl View Post
    Does the engine go through any of the warm up stages or at least rotate the drum when you turn it on?

    If the machine isn't going through the normal warm up stages, then you could have a faulty power supply.
    I confirm that errors in sys board


  4. #4
    Field Supervisor 1,000+ Posts
    Join Date
    Jun 2009
    Posts
    2,116
    Post Thanks / Like
    Rep Power
    58

    Re: Toshiba e 282 can not display

    How, exactly, did you confirm the error was on the system bd? By swapping them? If so, there are no servicable parts (other that NVRAM/RAM modules)..if it's working then your done...throw the bad board away...if you need to know specifcally what is wrong with the board send it to HYTECH...Emujo


  5. #5
    Technician
    Join Date
    Jun 2012
    Posts
    16
    Post Thanks / Like
    Rep Power
    5

    Re: Toshiba e 282 can not display

    Do NOT try to swap more than one board at a time or you WILL put the machine into a state that only a Toshiba technician can undo. This has to do with the counterfeiting protection built into the copier. Don't blindly swap boards, and if you didn't already know that, you really need to get a certified tech to repair the copier.


  6. #6
    Field Supervisor 1,000+ Posts
    Join Date
    Jun 2009
    Posts
    2,116
    Post Thanks / Like
    Rep Power
    58

    Re: Toshiba e 282 can not display

    Quote Originally Posted by Bpistulka View Post
    Do NOT try to swap more than one board at a time or you WILL put the machine into a state that only a Toshiba technician can undo. This has to do with the counterfeiting protection built into the copier. Don't blindly swap boards, and if you didn't already know that, you really need to get a certified tech to repair the copier.

    Clarification....the problem happens when you replace more than 1 board at a time and try to put the boards back into the MFP they came from...If you are using a working MFP to trouble shoot, then it's critical that you swap 1 board, if it doesn't fix the problem remove and put the board back into the original MFP and power it on/off...But I agree with Ppistulka, this sounds like you're over your head...call a Toshiba tech. Emujo


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here