e-Bridge X Issues

[arnh79]

Thank you so much. I'll definitely be looking into this.

[Greyghost]

So.....just got our 11th firmware update for ebx.........this one includes reloading drivers.
That should just about do it I think .

[NSD]

So.....just got our 11th firmware update for ebx.........this one includes reloading drivers.
That should just about do it I think .

Has anyone had further problems with these machines or are they settling down for you?
Mash machines seem good, but not as good as the EB3s where
the big monos lock up alot.
Boradpeask seem OK now
and the little monos I would just stay away from.

[arnh79]

Ever since v.1600 f/w was released I haven't had any more freezing/lock-up issues. I've got about 30-40 mono EBX machines in the field and they don't give us any problems as long as we upgrade them to v.1600. The "issues fixed" list included with v.1600 contained lots of scenarios where the machine could lock-up and even in newer versions of f/w I see they are still including fixes for locking up.
I never ran into any of the weird driver issues some of the guys on this thread were talking about, so I can't say whether or not those issues have been resolved.