Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts same_steven's Avatar
    Join Date
    Jun 2011
    Location
    NAIROBI
    Posts
    52
    Rep Power
    26

    Error E030 just refuses to go away!!!

    Hie frds,

    I have an Est 230 that is displaying error E030 that just refuses to go away.
    I have checked everywhere there is no paper jam.
    I have cleaned the registration sensor and serviced the machine entirely.
    What could be bothering it?

    Your responses would be highly appreciated.

    Me again,

    Same Steven

  2. #2
    Service Manager 5,000+ Posts
    Error E030 just refuses to go away!!!


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Thumbs up Re: Error E030 just refuses to go away!!!

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  3. #3
    Senior Tech 250+ Posts
    Join Date
    May 2011
    Posts
    401
    Rep Power
    31

    Re: Error E030 just refuses to go away!!!

    I will recommend u to perform input test & visual check on below sensor and actuator...

    Registration sensor 03-[FAX]ON/[2]/[A]
    1st transport sensor 03-[FAX]OFF/[6]/[E]
    Exit sensor 03-[FAX]ON/[2]/[B]

    Normally for e230/232, the exit actuator easily broken...

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Posts
    102
    Rep Power
    0

    Re: Error E030 just refuses to go away!!!

    Quote Originally Posted by didi2005 View Post
    I will recommend u to perform input test & visual check on below sensor and actuator...

    Registration sensor 03-[FAX]ON/[2]/[A]
    1st transport sensor 03-[FAX]OFF/[6]/[E]
    Exit sensor 03-[FAX]ON/[2]/[B]

    Normally for e230/232, the exit actuator easily broken...
    back to old topic, Doing "Registration sensor 03-[FAX]ON/[2]/[A]" but it highlighted "H"----Upper Drawer tray-up sensor(tray at upper limit position,
    Also doing other twos, all highlighted "H" Just want to know which sensor tricked the code. LCD indicated the location look like Registration or PFP uppreer drawer feed senor.
    any suggestion is great.

  5. #5
    Senior Tech 100+ Posts riyadh hossainbd's Avatar
    Join Date
    Dec 2015
    Location
    motijheel,dhaka
    Posts
    238
    Rep Power
    0

    Re: Error E030 just refuses to go away!!!

    Quote Originally Posted by peterxu256 View Post
    back to old topic, Doing "Registration sensor 03-[FAX]ON/[2]/[A]" but it highlighted "H"----Upper Drawer tray-up sensor(tray at upper limit position,
    Also doing other twos, all highlighted "H" Just want to know which sensor tricked the code. LCD indicated the location look like Registration or PFP uppreer drawer feed senor.
    any suggestion is great.
    change 1) "Registration sensor 2)1st trans sensor together

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Posts
    102
    Rep Power
    0

    Re: Error E030 just refuses to go away!!!

    Quote Originally Posted by riyadh hossainbd View Post
    change 1) "Registration sensor 2)1st trans sensor together
    Thanks, Will try. But could you explain the real meaning of "H" ?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here