Dry Torch, 08-900 will display your current F/W however as you have replaced the HDD, you can no longer access 08 Mode.
Assuming you have the correct F/W and it has been unzipped to the ONLY Folder on your Compatible USB Key, you need to open the Folder & Copy the File 'MENTUSB 0' to the Root Directory of the Key.
1/. Insert the Key into M/C > HOLD 4 & 9 > Power ON.
If the Display doesn't tell you 'Wrong Key' or something similar then you may be ok - the Display will then show up to 6 items with a '*' symbol beside each Item (these will be automatically updated when the Start Button is pressed) BUT we DO NOT want to do this as conflicts can occur and display 'HDD UPDATE FAILED' - Select ONLY 'SYSTEM' and 'HDD' together (untick the others by entering their numbers) > press Start (takes about 10 mins) if successful then 'UPDATE COMPLETED' will be displayed after the 2 selected Items.
If this is successful then Power Off and reinsert Key (as in 1/. above) and select the other Items to be Updated (make sure to DESELECT SYSTEM & HDD).
Assuming all is good now, remove Key and enter 08 Mode, check 900 for new Version, enter 947 Init-yes, 1119 init-yes, 693 Init-yes.
Shutdown M/C correctly and power up - should operate. Cliff.
Bookmarks