Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts aco.bk's Avatar
    Join Date
    Sep 2012
    Location
    BL
    Posts
    74
    Post Thanks / Like
    Rep Power
    4

    Toshiba eStudio 281c-error CE40 -----total 491000

    I have Toshiba eStudio 281c showing error CE40 in middle of AUTO CALIBRATION/(when turn on).Please tell m what this error means!? any advice will help....


  2. #2
    Junior Member
    Join Date
    May 2013
    Location
    Narre Warren
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    Post Re: Toshiba eStudio 281c-error CE40 -----total 491000

    CE40 Image quality control test pattern abnormality: The test pattern is not formed normally. most likely wear and tear parts worn out, Developers/ Drum etc, Look at the Transfer belt and check to see what the test pattern looks like, it should be a Sold and a Half tone Rectangle of each colour.



  3. #3
    Field Tech 500+ Posts


    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    549
    Post Thanks / Like
    Rep Power
    17

    Re: Toshiba eStudio 281c-error CE40 -----total 491000

    Could be a lot of things. First of all is the transfer belt intact? Have you much experience on these models (just to if not I will have to type more).

    It didn't say that I couldn't do it in the manual.

  4. #4
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133

    Lightbulb Re: Toshiba eStudio 281c-error CE40 -----total 491000

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  5. #5
    Trusted Tech 50+ Posts aco.bk's Avatar
    Join Date
    Sep 2012
    Location
    BL
    Posts
    74
    Post Thanks / Like
    Rep Power
    4

    Re: Toshiba eStudio 281c-error CE40 -----total 491000

    Thanks guys( michaelc andclint@clintsimonsen.com)
    I replaced the toner (C,M,Y) with newone and error was gone.Maybe old the toners was not transported to Develop!


  6. #6
    Field Supervisor 1,000+ Posts
    Join Date
    Jun 2009
    Posts
    2,098
    Post Thanks / Like
    Rep Power
    56

    Re: Toshiba eStudio 281c-error CE40 -----total 491000

    I wouldn't pat yourself on the back yet...you would get a low toner message long before you started getting the CE40 error code. My guess is the MFP just passed its IQC tests this time, but at the next look, it will be back. It could be low developer, bad t-fer belt, worn drum, cleaning blade (drum/x-fer belt), or dirty sensor. If you print out the test charts, what does the overall color/black CQ look like? EMujo

    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  7. #7
    Trusted Tech 50+ Posts aco.bk's Avatar
    Join Date
    Sep 2012
    Location
    BL
    Posts
    74
    Post Thanks / Like
    Rep Power
    4

    Re: Toshiba eStudio 281c-error CE40 -----total 491000

    Ok Emujo I will report You soon.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here